06-08 YZF 250 & 450 bar positions are as follows:
This SUB Mount offers two bar positions: 16mm & 26mm in front of steering stem.
16mm is stock position # 2 on YZF 250 & 450.
26mm is 10mm forward from positoin # 2 on YZF 250 & 450.
09 – 13 YZF 250 & 450 bar positions are as follows:
This SUB Mount offers two bar positions: 10mm & 20mm in front of steering stem.
10mm is stock position # 2 on YZF 250 & 450.
20mm is position # 3 on YZF 250 & 450.
Position 1 and 4 are NOT available with this kit.
The BRP SUB “Scotts Under Bar” Mount is the latest in stabilizer mounting options and is a very popular setup for GP’s, motocross, off road and riders of taller stature. The SUB Mount is designed to run 1 1/8″ ProTaper style handlebar and mount a Scotts stabilizer below the handlebar replacing the bar mount assembly on your OEM, BRP or Scotts triple clamp. The SUB Mount setup offers several benefits over a conventional “above bar” stabilizer setup.
- Reduced risk of injury by coming into contact with stabilizer
- Approximately 1″ taller bar position on most models
- Enables you to run a bar pad for 1 more level of protection
BRP SUB Mounts are designed exclusively to fit OEM, BRP or Scotts triple clamps. In some cases we may have one that will work on other aftermarket triple clamps. If you have a triple clamp other than OEM, BRP or Scotts; please contact us to see if we have an application that will work.
BRP is an authorized Scotts Stabilizer Dealer and Service center with an extensive knowledge of stabilizer mounting applications. We have a complete line of stabilizer mounting applications and replacement parts. When it comes to service we offer complete service on all Scotts stabilizers.
When running a Scotts stabilizer in the SUB Mount configuration the arm will need to be reversed mounted. Using a lower bend bar can often emulate the stock bar height. Due to the SUB Mounts increased height, triple clamp style enduro handguard mounts will not work with many bar bends so we recommend running either U-clamp or BRP hand guard mounts.
|Dimensions||8 × 8 × 6 in|
|Triple Clamp on Bike|
There are no reviews yet.