This SUB Mount allows you to run a Scotts Steering Stabilizer under the handlebars and offers two handlebar positions: 17mm or 27mm in front of steering stem. Stock Bar position is 14mm in front of steering stem. Handlebar height is raised by 22.5mm. If you wish to keep your bars at the stock height we recommend using a Pro-Taper Steering Damper Low.
BRP triple clamps offer a wide range of options to accommodate different rider ergonomics. In most cases a BRP SUB Mounted triple clamp offers a 25mm (1″) taller bar position and a bar position with a greater “RTS” (Relative to Stem) distance than a stock triple clamp which helps improve the ergo’s for most all riders. [ RTS Chart ]
The BRP SUB Mount is designed to run 1 1/8″ bars (Optional 7/8″ bar adapters are available). This style of stabilizer mounting offers several great benefits to both the average height or taller rider.
- Reduces the risk of rider coming into contact with the stabilizer
- SUB mounting prevents damage to stabilizer in the event of a crash
- Shorter tower creates a more positive stabilizer action
- Ability to run bar pad adding another level of protection for the rider
- 25mm (1″) taller bar position for the taller stature rider (shorter riders can use lower bar bends)
BRP triple clamps are manufactured to the highest quality standards from 6061-T6 billet aluminum which is far stronger than the OEM unit and comparable in weight. Our precision machined fork bores feature a 2 pinch bolt design that increases the clamping surface on the forks which in turn will help prevent fork twist in the event of a hard landing or crash. Finished in our signature black anodize the BRP triple clamps will give your machine that factory look.
This is an easy bolt on assembly which requires basic hand tools and can be performed by the novice mechanic.
When running a Scotts stabilizer in the SUB Mount configuration the arm will need to be reversed mounted. Using a lower bend bar can often emulate the stock bar height. Due to the SUB Mounts increased height, triple clamp style enduro handguard mounts will not work with many bar bends so we recommend running the BRP BMI-9254 Hand Guard Mounts.
|12 × 6 × 6 in
|Bar Clamp Style
|Bar Mount Height
|Bar Mount Option
|Bar Position "RTS"