Scotts Stabilizer Replacement Parts

Description

Scotts Stabilizer Replacement Parts

For the typical rebuild, most people only need the rebuild kit, (#31 or here), and stabilizer oil (see here).

If you are not extremely confident in your own ability, please just send your stabilizer in to us for rebuild (see here).

Most common replacements:

2) spring, 3) steel ball, 4) pointer, 5) brass knob, 22) 15mm nut, and 10) and 11) top screws (please replace them if they are starting to strip or getting corroded)

If your stabilizer has the old brass Base Valve, you should really replace it with the steel 7) Base Valve. We always do this as part of our rebuild service, the base valves are very difficult to remove and install without a special tool.

Complete Parts List:

• # Part No Description
• 1  1502-04 Set screw (1)
• 2  4017-01 Spring (1)
• 3  0884-04 Steel ball (1)
• 4  4030-01 Pointer (1)
• 5  4016-01 Brass Knob with Pin (1)
• 6  0338-57 O-ring (Knob to base valve) (1)
• 7  4003-01 Base valve (needle, seat & o-ring) (Dirt Bike) (1)
• 7  4003-02 Base valve (needle, seat & o-ring) (Road Bike) (1)
• 8  0338-14 O-ring (base valve needle) (1)
• 9  4001-01 Top housing cover – Dirt Bike (Bare) (1)
• 9  4001-02 Top housing cover – Road Bike (Bare) (1)
• 10  0382-04 Screw (4 X 10 Socket Flathead) (4)
• 11  1046-10 Screw (4 X 12 socket Cap head) (6)
• 12  4006-01 Pin (Retainer for sweep) (2)
• 13  0338-58 O-ring (sweep control) (1)
• 14  4035-01 Sweep control assembly – Dirt Bike (2)
• 14  4035-02 Sweep control assembly – Road Bike (2)
• 15  1027-02 Main seal (requires) (2)
• 16  4028-01 Main wing assembly (1)
• 17  0338-55 O-ring (Top cap to body) (1)
• 18  4009-01 Shear pin (1)
• 19  4002-01 Main housing (Body) (1)
• 20  0338-56 O-ring (Bottom bleed hole) (2)
• 21  0382-05 Screw (4 X 6 Socket Flathead) (2)
• 22  4010-01 Nut (1)
• 23  4024-01 Plastic Cap (high speed valve) (1)
• 24  0338-59 O-ring high speed valve (1)
• 25  4005-01 High speed valve assembly (No outer housing) (1)
• 26  4005-02 High speed valve assembly (With outer housing) (1)
• 27  4032-35 Link Arm Stepped -5mm Open (1)
• 27  4031-40 Link Arm Flat Standard (1)
• 27  4032-40 Link Arm Stepped Standard (1)
• 27  4032-48 Link ArmStepped +8mm (1)
• 27  4032-74 Link Arm Stepped +34mm (1)
• 28  4033-08 Tower Pin And Collar – Extra Tall (63mm) (1)
• 28  4033-11 Tower Pin And Collar – (-7mm) (43mm) (1)
• 28  4033-13 Tower Pin And Collar – (-16mm) (34mm) (1)
• 28  4033-14 Tower Pin And Collar – (24mm with 8 x 1.0 threads) (1)
• 29  4033-15 Tower Pin Replacement Collar Only (5.8mm) (1)
• 29  4033-09 Tower Pin Replacement Collar Only (7.4mm) (1)
• 30  0620AB-100 Screw (6 X 20 socket cap screw) (2)
• 31  0338-00 Seal Replacement Kit (1)