BRP RUBBER SUB MOUNT KIT | 24-25 KTM 125-500 All Models

Description

The BRP Rubber SUB Mount Kit uses (8) Poly-Urethane bushings to isolate vibration and reduce rider fatigue by softening the harsh spike of hitting square edge rocks and obstacles. Our kit comes complete with two different durometer bushings to fine tune the amount of vibration dampening.

BRP RUBBER MOUNTED DM-SUB KIT INCLUDES:
1) BRP Rubber Mounted SUB Adapter
2) Sets of Rubber Bushings -(Red = Medium and Blue = Soft.)
1) Low Profile Stem Bolt
4) Aluminum Cones & All Necessary Hardware
1) Scotts Frame Bracket & Dust Cover
1) Hour meter relocation bracket & All Necessary Hardware

We recommend using a Clean Speed Cable Guide (Sold Separately) to ensure proper cable routing.  (Select Cable Guide in drop down menu)

DETAILS:

This Rubber SUB Mount Kit is designed for those of you who already have a Scotts stabilizer and would like to mount under the bars. Kit includes Sub adapter and all necessary hardware.

Designed to mount a Scotts stabilizer below the handlebar using your OEM cast or billet triple clamp. The BRP Rubber Mounted SUB adapter mounts to the existing rear bar mount holes and allows you to run in position 3 which is the most common and popular position. SUB Mounting a stabilizer offers several benefits over a conventional “above bar” setup and is becoming a very popular setup for GP’s, motocross, off road, dual sport applications and riders of taller stature.

• Offers an approximately 1″ taller bar position
• Lower Bend Bars can compensate for additional height.
• SUB Mounting reduces the risk of bodily injury
• Stabilizer sits under bars and safe from potential damage from a crash.

BRP is an authorized Scotts Stabilizer Dealer and Service center with an extensive knowledge of stabilizer mounting applications. We have a complete line of stabilizer mounting applications and replacement parts.

SPECIAL NOTES:
When running a stabilizer in the sub mount configuration, the stabilizer link arm will need to be in the reverse position “going under the body of the unit”. To reverse the link arm we recommend using a Scotts Link Arm Puller (Sold Separately). This unit cannot be used with cycra center reach mount handguards.

CLICK HERE for our full line of KTM products!

And don’t forget to check us out on Facebook to keep up to date on all our new product releases!