BRP Upper & Lower Triple Clamp Set 96-14 YZ 80/85

Description

BRP Stock offset triple clamp sets are a great way to enhance the handling, ergonomics and look of your machine. With BRP triple clamps you have a wide range of options to accommodate different rider ergonomic preferences. In most cases our top triple clamps offer a bar position with a greater “RTS” (Relative to Stem) distance than the stock triple clamp. [ RTS Chart ] Our triple clamp sets are available for most models in 4 basic bar mount configurations; featuring reversible bar mounts, 3 different bar mount heights and in some cases different lower bar perch offsets for increased bar position options.

BRP triple clamps are manufactured to the highest standards of precision and quality from 6061-T6 billet aluminum that is comparable in weight and far stronger than your OEM clamps. Our precision machined fork bores feature a 2 pinch bolt design that increases the clamping surface helping to prevent fork twist in the event of hard landings or crashing. Finished in our signature black anodize BRP triple clamps will give your machine that factory look.

Bar Mount Configurations

• BRP Pro Moto top triple clamp configuration is offered with individual top bar clamps “moto” and is a great setup for Motocross, Supercross and mini applications.
• BRP Pro SX top triple clamp configuration is offered with a 1 piece SX style top bar clamp which provides additional clamping surface and is a great setup for Motocross, Supercross, Freestyle and mini applications.
• BRP Pro Scotts top triple clamp configuration is offered with a Scotts top bar clamp which allows you to mount your Scotts Stabilizer conventionally above the handlebars and is a great setup for all riding applications especially off road.
• BRP SUB Mount top triple clamp configuration is offered with a BRP Scotts Under Bar mount which allows you to mount your Scotts Stabilizer below the handlebars and is a great setup for all riding conditions and especially those of you who are looking to raise the handlebar height. (1″ or 25mm in most cases)

This is fairly easy bolt on assembly which requires the steering stem to be pressed into the lower triple clamp (should be done by a qualified mechanic). The triple clamp installation requires basic hand tools and can be performed by the novice mechanic.

SPECIAL NOTES:
Depending on the model there may be additional hardware required such as; headlight & odo brackets or mounts that are an additional charge. The lower triple clamp does not come with steering stem but in most cases is available from BRP. If you add the steering stem to your order we can do the installation for you. Some applications are available with solid or rubber mounted bar mounts only. In some cases selecting rubber mounted bar mounts may add 5mm to bar mount height. The fork pinch bolts may come from the front or side depending on the model. We also offer additional bar positions Relative to Stem “RTS” for most models see RTS Chart. If you need more information about these possible options, feel free to contact us or SPECIFY IN THE CUSTOMER NOTES SECTION DURING THE CHECK-OUT PROCESS and we will contact you with the information.