Description

2019-2024 Sherco SUB Kit

The BRP Sherco SUB Kit (Scotts Under Bar) uses our Rubber SUB Mount with (8) Poly-Urethane bushings to isolate vibration and reduce rider fatigue by softening the harsh spike of hitting square edge rocks and obstacles. NOW available with two different durometer bushings to fine tune the amount of vibration dampening.

BRP RUBBER MOUNTED GAS GAS SUB KIT INCLUDES:

1) BRP Rubber Mounted SUB Adapter

1) Scotts Bolt on Tower (Frame Bracket)

2) Sets of Rubber Bushings -(Red = Medium and Blue = Soft.)
& All Necessary Hardware.

We recommend using a Clean Speed Cable Guide (Sold Separately) to ensure proper cable routing.  (Select Cable Guide in drop down menu)

This Sherco SUB Kit is perfect for those of you who have a Scotts stabilizer and would like to go sub mounted. Kit includes Sub adapter and necessary hardware.
Designed to mount a Scotts stabilizer below the handlebar using your OEM cast or billet triple clamp. The BRP Rubber Mounted SUB adapter mounts to the existing rear bar mount holes and allows you to run in position 3 which is the most common and popular position. SUB Mounting a stabilizer offers several benefits over a conventional “above bar” setup and is becoming a very popular setup for GP’s, motocross, off road, dual sport applications and riders of taller stature.

RUBBER SUB MOUNT SPECS:

• Offers an approximately 1″ taller bar position
• Lower Bend Bars can  for additional height.
• SUB Mounting reduces the risk of bodily injury
• Stabilizer is tucked away and protected from potential damage from a crash.

BRP is an authorized Scotts Stabilizer Dealer and Service center with an extensive knowledge of stabilizer mounting applications. We have a complete line of stabilizer mounting applications and replacement parts. When it comes to service we offer complete service on all Scotts stabilizers.
SPECIAL NOTES:
Be sure to select the proper year, model and triple clamp in order to get the correct part for your order. When running a stabilizer in the sub mount configuration, the stabilizer link arm will need to be in the reverse position “going under the body of the unit”. To reverse the link arm we recommend using a Scotts Link Arm Puller (Sold Separately). This unit cannot be used with cycra center reach mount handguards.

CLICK HERE for our full line of Sherco products!

And don’t forget to check us out on Facebook to keep up to date on all our new product releases!