BRP U&L Triple Clamp Set 05-07 CRF 450 X Model (22mm Offset)

Description

Note: 04-17 CRF 250X & 05-07 CRF 450X came equipped stock with 24mm offset.

BRP 22mm offset triple clamp sets are a great way to enhance the handling, ergonomics and look of your machine. The X Models require additional hardware for the headlight and odo, be sure to select the options below. With BRP triple clamps you have a wide range of options to accommodate different rider ergonomic preferences. In most cases our top triple clamps offer a bar position with a greater “RTS” (Relative to Stem) distance than the stock triple clamp. [ RTS Chart ] Our triple clamp sets are available for most models in 4 basic bar mount configurations; featuring reversible bar mounts, 3 different bar mount heights and in some cases different lower bar perch offsets for increased bar position options.

We offer 20mm & 22mm offset triple clamps for the late model CR/CRF full size models. By REDUCING the offset (centerline distance between the fork tubes and the centerline of the steering stem) it changes the trail of the chasis; thus improving the handling characteristics on these bikes and may have a slight affect on high speed stability.

BRP triple clamps are manufactured to the highest quality standards from 6061-T6 billet aluminum which is far stronger than the OEM unit and comparable in weight. Our precision machined fork bores feature a 2 pinch bolt design that increases the clamping surface on the forks which in turn will help prevent fork twist in the event of a hard landing or crash. Finished in our signature black anodize the BRP triple clamp will give your machine that factory look.

Bar Mount Configurations

• • BRP Pro SX top triple clamp configuration is offered with a 1 piece SX style top bar clamp which provides additional clamping surface and is a great setup for Motocross, Supercross, Freestyle and mini applications.
  • BRP Pro Scotts top triple clamp configuration is offered with a Scotts top bar clamp which allows you to mount your Scotts Stabilizer conventionally above the handlebars and is a great setup for all riding applications especially off road.

This is fairly easy bolt on assembly which requires the steering stem to be pressed into the lower triple clamp which should be done by a qualified mechanic, but the installation requires basic hand tools and can be performed by the novice mechanic.