SCOTTS Stabilizer Link Arm Puller Tool

Description

The Scotts link arm puller makes pulling the link arm from your Scotts stabilizer a breeze. This small but important tool is a great tool for any service shop, mechanic or tool box.

Easy to use, just evenly insert small screws into existing holes in link arm, then tighten the 8mm allen bolt with a 6mm allen wrench to remove the link arm. Using the puller tool instead of prying on arm will prevent damage to your expensive Scotts stabilizer.

BRP is an authorized Scotts Stabilizer Dealer and Service center with an extensive knowledge of stabilizer mounting applications. We have a complete line of stabilizer mounting applications and replacement parts. When it comes to service we offer complete service on all Scotts stabilizers.

SPECIAL NOTES:

• Screw small screws while keeping the body of the puller parallel to the link arm.
• Reinstalling the link arm should be performed by a qualified mechanic or service center.
• When installing the link arm nut we recommend using a little red loctite to prevent the nut from coming loose.
• DON’T OVER TIGHTEN NUT it only has 3-4 threads that can be stripped if you tighten it to much.