BRP Adjustable SUB Mount DM-SUB 19-24 CRF 450X

Description

To add a Scotts Steering Stabilizer Please select it in the Drop Down Menu.

This SUB Mount allows you to run the bars in two positions. Handlebar height is raised by 25mm. If you wish to keep your bars at the stock height we recommend using a Pro-Taper RM Low handlebar.

BRP DM-SUB Kit’s are for those of you who have a Scotts stabilizer and would like to step up to the SUB Mount system. Our DM-SUB kits come with SUB Mount and Bolt on tower and are priced as one of our package deals to save you money.

The BRP SUB “Scotts Under Bar” Mount is the latest in stabilizer mounting options and is a very popular setup for GP’s, motocross, off road and riders of taller stature. The SUB Mount is designed to run 1 1/8″ ProTaper style handlebar and mount a Scotts stabilizer below the handlebar replacing the bar mount assembly on your OEM, BRP or Scotts triple clamp. The SUB Mount setup offers several benefits over a conventional “above bar” stabilizer setup.

• Reduced risk of injury by coming into contact with stabilizer
• Approximately 1″ taller bar position on most models
• Enables you to run a bar pad for 1 more level of protection

BRP SUB Mounts are designed exclusively to fit OEM, BRP or Scotts triple clamps. In some cases we may have one that will work on other aftermarket triple clamps. If you have a triple clamp other than OEM, BRP or Scotts; please contact us to see if we have an application that will work.

BRP is an authorized Scotts Stabilizer Dealer and Service center with an extensive knowledge of stabilizer mounting applications. We have a complete line of stabilizer mounting applications and replacement parts. When it comes to service we offer complete service on all Scotts stabilizers.

SPECIAL NOTES:
When running a Scotts stabilizer in the SUB Mount configuration the arm will need to be reversed mounted. Using a lower bend bar can often emulate the stock bar height. Due to the SUB Mounts increased height, triple clamp style enduro handguard mounts will not work with many bar bends so we recommend running the BRP BMI-9254 Hand Guard Mounts.