Note: We only stock Black Seal Savers in 1-3/4″ for full size (125+) bikes. If you want a different color or size, please contact us directly at 719-633-8133.
SealSavers are designed to slide over the fork tube and cover the seal area preventing debris from getting into the fork seals. This helps reduce fork seal failure. SealSavers are durable and washable and will not affect your fork damping or preload.
For best results we recommend installing Fork SealSavers on new or freshly serviced fork tubes, however, you can clean the seals and wipers by hand before installing the Fork SealSavers.
Available for both inverted or conventional forks for models from 65-650. Available in several different colors including black, blue, red, yellow, green, silver and (orange;125-500).
|1 1/8 inch (fits up to 31mm fork tube)||Cobra and other 50 cc bikes||black, red, yellow, silver|
|1 1/4 inch (32 – 35mm fork tube)||KTM, Polini, Kawasaki LEM, HM and other 50cc through 65cc bikes||black, blue, orange, gray, green|
|1 1/2 inch (36 – 43mm fork tube)||Most 80-85cc bikes||black, blue, red, yellow, gray, green|
|1 3/4 inch (44 – 50mm fork tube)||Most 125cc through 500+cc bikes||black, blue, red, orange, yellow, gray, green|
Be sure to select the proper size and color choice from the options.
Fitment is defined by fork type and fork diameter. The fork diameter is measured on the chrome fork tube. Certain colors may not be available for your model. Be sure to clean forks and seals prior to installation to prevent damage to seals. It’s important to use a zip tie to prevent the sealsaver from slipping up or down.
|Dimensions||4 × 4 × 4 in|